home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
BBS Toolkit
/
BBS Toolkit.iso
/
maximus
/
protocol.zip
/
PROTO081.TXT
< prev
next >
Wrap
Internet Message Format
|
1992-04-25
|
37KB
From: Ross Smarekar Area: Protocols
To: Martin Essenburg 21 Feb 92 02:21:10
Subject: Ymodem-G UpdReq
ME>Can someone post the protocol.ctl file that will let Max
ME>2.0 use DSZ for ymodem G. It works but it never prompts the
ME>user to add the file names..
it'd also bee nice to see one for PSZ also... (all protocals please)
Ross
___
X SLMR 2.1 X It said, "Incert Disk #3", but only 2 would fit
--------------= Brought to you compliments of Plastic Tower =---------------
From: John Musselwhite Area: Protocols
To: Ross Smarekar 23 Feb 92 14:09:38
Subject: Ymodem-G UpdReq
Hi Ross...
In a message on <Feb 21 02:21>, you wrote:
ME>Can someone post the protocol.ctl file that will let Max
RS> it'd also bee nice to see one for PSZ also... (all protocals
RS> please)
I have been trying to set up PCZ for all protocols as it is more keeping
with the spirit of Max... NO luck yet...
SOMEBODY must have them all working! B-})
John...
--------------= Brought to you compliments of Plastic Tower =---------------
From: Ross Smarekar Area: Protocols
To: Martin Essenburg 21 Feb 92 02:21:00
Subject: Ymodem-G UpdReq
ME>Can someone post the protocol.ctl file that will let Max
ME>2.0 use DSZ for ymodem G. It works but it never prompts the
ME>user to add the file names..
it'd also bee nice to see one for PSZ also... (all protocals please)
Ross
___
X SLMR 2.1 X It said, "Incert Disk #3", but only 2 would fit
--------------= Brought to you compliments of Plastic Tower =---------------
From: Ron Dwight Area: Protocols
To: Gerhard Lustig 20 Feb 92 14:28:14
Subject: HSLink UpdReq
Hi Gerhard,
> 12.Feb.1992, Bob James writes to All:
> BJ> Has anyone out there ever used HSLink as an additional protocol with
> Max?
> BJ> If so, could that someone please post the PROTOCOL.CTL series for it?
> Protocol HS/Link (better BIModem!)
> Type Batch
> Type Bi
> LogFile DSZ%K.Log
> ControlFile DSZ%K.Ctl
> DownloadCmd HSlink -P%P -S4096 -B%b -E%W -U%V -A
> @%x:DSZ%K.Ctl
> UploadCmd HSlink -P%P -S4096 -B%b -E%W -U%V -A
> @%x:DSZ%K.Ctl
Slight confusion here in the -B and -E parameters. I think it
should be "-B%W and -E%b" at least this way it doesn't freeze the machine
with a locked FOSSIL. Anyway it's a simpler solution than using a batch
file, thanks.
How about the moderator posting a few of the other protocols here so
we can all benefit?
Cheers,
--------------= Brought to you compliments of Plastic Tower =---------------
From: David Ready Area: Protocols
To: All 24 Feb 92 02:26:52
Subject: DSZ.LOG UpdReq
Has anybody been having problem with download upload logs and how they are
handled by protocol.ctl. I keep getting a msg that such and such a log can't
be opened and the user gets the msg that the transfer was aborted even though
it was sucessful. I can manually create say a dsz.log and even though it is a
SET enviroment varible it deletes the log on exit from the ul/dl. The same
happens with other protocols.
Has anybody in the echo sucessfully installed Megalink (mlink16.exe)?
regards...David
--------------= Brought to you compliments of Plastic Tower =---------------
From: Billy Cash Area: Protocols
To: Jose Avelar 25 Feb 92 18:48:10
Subject: calculating d/l time at x baud UpdReq
JA> I'm a little stumped here. I'm working on setting up my ratios and
JA> need some help on how to calculate the time it takes to d/l a
JA> specific file at x baud. If someone has the formula and can pass it
JA> over I would sure be happy.
file size / bps rate * 10 * efficiency rate of protocol / 60 = number of
minutes
The efficiency rate of ZMODEM is about 95%, so multiply .95.
>>>W>F>C>3>
--------------= Brought to you compliments of Plastic Tower =---------------
From: Scott Dudley Area: Protocols
To: Billy Cash 26 Feb 92 20:10:36
Subject: Logged Bits! <<CARRIER HANGS, ETC>> UpdReq
BC> <grin> Anyway, I already have Path Temp pointing to
BC> D:\MAXTEMP. But "Most uploads?" Which uploads will
BC> not?
It depends on the protocol. Xmodem, X-1K and (as I recall) Telink all go to
the temp path.
--------------= Brought to you compliments of Plastic Tower =---------------
From: Scott Burkett Area: Protocols
To: Brian Hampson 27 Feb 92 07:32:32
Subject: Dupe Checking UpdReq
In a msg on <Feb 25 18:17>, Brian Hampson of 1:153/733 writes:
BH> Did the user choose an external protocol? No dupe checking
BH> there.
Interesting, and correct. Hmmm...I wish Max would prompt for the filename
BEFORE shelling to an external protocol. That way, dupe checking could be
initiated for all uploads, no matter what the protocol.....Scott?
Scott :)
--------------= Brought to you compliments of Plastic Tower =---------------
From: John Cathie Area: Protocols
To: Scott Burkett 1 Mar 92 11:07:24
Subject: Dupe Checking UpdReq
Howdy Scott,
In a msg of <27 Feb 92>, Scott Burkett writes to Brian Hampson:
SB> Interesting, and correct. Hmmm...I wish Max would prompt for the
SB> filename BEFORE shelling to an external protocol. That way, dupe
SB> checking could be initiated for all uploads, no matter what the
SB> protocol.....Scott?
Yeah, it's too bad such a good feature (dupe check) only came out half baked.
With Max's extensive capabilities for external protocols, I'm really
surprised this wasn't thought out better.
But, with all the other features Scott had to work on, we should forgive him.
He's only human. :)
John
--------------= Brought to you compliments of Plastic Tower =---------------
From: Brian Hampson Area: Protocols
To: Scott Burkett 29 Feb 92 20:54:50
Subject: Dupe Checking UpdReq
SB> Interesting, and correct. Hmmm...I wish Max would
SB> prompt for the filename BEFORE shelling to an external
SB> protocol. That way, dupe checking could be initiated
That defeats the idea of a BATCH protocol though.
B.
--------------= Brought to you compliments of Plastic Tower =---------------
From: Charlie Johnson Area: Protocols
To: Scott Dudley 2 Mar 92 11:44:42
Subject: Super Z & J UpdReq
If you (like me) have been forced by the high volume of MUFFIN messages to
only read messages if they are addressed to you personally, then I will
repeat the question, originally addressed to "All":
What should the lines in protocol.ctl look like to add both J-Modem and
SZ-Modem protocols?
Thanks in advance.
CJ
--------------= Brought to you compliments of Plastic Tower =---------------
From: Scott Dudley Area: Protocols
To: Charlie Johnson 5 Mar 92 11:09:38
Subject: Super Z & J UpdReq
CJ> What should the lines in protocol.ctl look like to add
CJ> both J-Modem and SZ-Modem protocols?
I don't know. I have never run JModem or SZModem. Moreover, they don't even
run under my operating system, so I have no way to easily test them.
--------------= Brought to you compliments of Plastic Tower =---------------
From: Richard Butler Area: Protocols
To: All 5 Mar 92 16:43:52
Subject: SZmodem UpdReq
Anybody have the PROTOCOL.CTL settings for SZmodem?
While you're at it, how about the settings for DSZ True Y-Modem?
Thanks.
--------------= Brought to you compliments of Plastic Tower =---------------
From: Scott Burkett Area: Protocols
To: Brian Hampson 7 Mar 92 07:36:12
Subject: Dupe Checking UpdReq
In a msg on <Feb 28 01:01>, Brian Hampson of 1:153/733 writes:
SB> Interesting, and correct. Hmmm...I wish Max would
SB> prompt for the filename BEFORE shelling to an external
SB> protocol. That way, dupe checking could be initiated
BH> That defeats the idea of a BATCH protocol though.
Perhaps Max could keep Scan each upload as the user types the description in...
--------------= Brought to you compliments of Plastic Tower =---------------
From: Charlie Johnson Area: Protocols
To: Richard Butler 7 Mar 92 02:03:06
Subject: Re: SZmodem UpdReq
RB> Anybody have the PROTOCOL.CTL settings for SZmodem?
I been asking for several months now with only 1 reply on the topic,(and that
was an "Sorry but I can't help you on that one" reply).
:-(
CJ
--------------= Brought to you compliments of Plastic Tower =---------------
From: Huw Upshall Area: Protocols
To: Anyone 8 Mar 92 14:01:04
Subject: HS-Link UpdReq
Does anyone have a HS-Link Protocol.ctl configuration set up? if so, i'd like
to have a copy, could you post it here?
--------------= Brought to you compliments of Plastic Tower =---------------
From: Greg Martz Area: Protocols
To: Huw Upshall 9 Mar 92 06:44:00
Subject: Re: HS-Link UpdReq
Hello Huw Upshall
In a message Huw Upshall (1:3401/12.0) writes:
HU> Does anyone have a HS-Link Protocol.ctl configuration set up? if
HU> so, i'd like to have a copy, could you post it here?
Protocol HSLink
Type Batch
; Type Errorlevel
Type Bi
; Type Opus
LogFile d:\max\HSL%K.Log
ControlFile d:\max\HSL%K.Ctl
DownloadCmd command.com /c rhsl d:\max\HSL%K.Log -P%P -B%W -E%b
-U%V @d:\max\HSL%K.Ctl
UploadCmd command.com /c rhsl d:\max\HSL%K.Log -P%P -B%W -E%b
-U%V
DownloadString %s
UploadString
DownloadKeyword h
UploadKeyword H
FilenameWord 10
DescriptWord 0
End Protocol
The rhsl.bat in max directory:
@echo off
d:
cdd d:\max
set dszlog=%1
Hslink %2 %3 %4 %5 %6 %7 %8 %9
set dszlog=
Greg.
--------------= Brought to you compliments of Plastic Tower =---------------
From: Tom Keyes Area: Protocols
To: Antony Winn 9 Mar 92 08:51:06
Subject: Maximus and non standard comms ports. UpdReq
In a message on <Mar 04 15:17>, Antony Winn (3:691/107@fidonet) writes:
BB> In a msg on Feb 22 92, Antony Winn of 3:691/107 writes:
AW> Anyone know how to run Max on Com3 with IRQ5 instead if 4?
BB> Sounds like a job for your fossil driver, not Max.
BB> Check the docs for your fossil -- they should tell you
BB> how to set alternative addresses and IRQ's for each
BB> port.
AW>Yeah, I'd totally forgotten about the existance of my fossil, been that
AW>long since I had to worry about it.. <blush> Silly me eh?
AW>Thanks for the help.
AW>Later,
AW> Antony.
You will have to concern yourself with the external Protocols.. Such as DSZ
I changed the RDSZ Batch file to read(using com1 and IRQ 5 on Task 1.)
If %2 == 1 goto d1
Dsz port %2 speed %3 %4 %5 %6 %7 %8 %9
goto end
:d1
dsz port 03f4,5 speed %3 %4 %5 %6 %7 %8 %9
:end
Zmodem does not see the fossil change. You may also have to change some others
in Protocol.ctl..
--------------= Brought to you compliments of Plastic Tower =---------------
From: David Jones Area: Protocols
To: Huw Upshall 10 Mar 92 07:40:42
Subject: HS-Link UpdReq
Protocol HS/Link
Type Batch
; Type Errorlevel
Type Bi
; Type Opus
LogFile HSL%K.Log
ControlFile HSL%K.Ctl
DownloadCmd command.com /c rhsl HSL%K.Log %P %V @%x:HSL%K.Ctl
UploadCmd command.com /c rhsl HSL%K.Log %P %V
DownloadString %s
UploadString
DownloadKeyword h
UploadKeyword H
FilenameWord 10
DescriptWord 0
End Protocol
Hope it helps.
--------------= Brought to you compliments of Plastic Tower =---------------
From: Bruno Soucy Area: Protocols
To: Huw Upshall 11 Mar 92 00:54:08
Subject: HS-Link UpdReq
HU> Does anyone have a HS-Link Protocol.ctl configuration
HU> set up? if so, i'd like to have a copy, could you post
HU> it here?
I've tried to set it up but have found many problems doing so. I have tried
setting up many external protocols for max but have run across the same
problem over and over again.
I have the following installed:
MPT
DSZ
Bimodem
HS/LINK
HYPER
Super Zmodem
MPT and DSZ work perfectly (I just used the default parameters) but however
when it comes to the rest, Max will always tell me "Can't open @xxx.log" at
the end of the transfer and then will send me "TRANSFER ABORTED" thus not
recording any downloading or uploading activity. I thought that the problem
lied with my command lines, but have found the same problem with Bimodem's
default configuration in PROTOCOL.CTL... How come it can't open these log
files? If you can solve this problem, I believe my HS/LINK entry is correct.
I would really appreciate any help/assistance anyone could muster...
Thanks,
Bruno
--------------= Brought to you compliments of Plastic Tower =---------------
From: Eric Ulken Area: Protocols
To: David Jones 10 Mar 92 22:03:42
Subject: HS-Link UpdReq
On <Mar 10 07:40>, David Jones (1:124/6009) scribbled something like this:
DJ> Protocol HS/Link
What exactly is HS/Link. I noticed it is used as a bidirectional transfer
protocol. The only bidirectional protocols I know are Bimodem and Janus. Is
this any good? If so, where can I get it? Thanks!
-EU
--------------= Brought to you compliments of Plastic Tower =---------------
From: David Jones Area: Protocols
To: Eric Ulken 11 Mar 92 05:47:56
Subject: HS-Link UpdReq
EU> What exactly is HS/Link. I noticed it is used
EU> as a bidirectional transfer protocol. The only
EU> bidirectional protocols I know are Bimodem and
EU> Janus. Is this any good? If so, where can I get
EU> it? Thanks!
EU>
It's basically like them, although it has other features..I use it and have
had no problems.. It is Widely available..
--------------= Brought to you compliments of Plastic Tower =---------------
From: Steve Hughes Area: Protocols
To: Charlie Johnson 10 Mar 92 11:26:24
Subject: Re: SZmodem UpdReq
RB> Anybody have the PROTOCOL.CTL settings for SZmodem?
CJ> I been asking for several months now with only 1 reply
CJ> on the topic,(and that was an "Sorry but I can't help
CJ> you on that one" reply).
Someone else posted this a month or so ago. It's not mine !!!
I emphasize that because it wouldn't work for me, you may have better luck of
course :-)
Protocol SZmodem
Type Batch
Logfile DSZ%K.log
ControlFile SZmodem.ctl
Downloadcmd command /c SZXFER DSZ%K.log SZ @SZmodem.ctl
Uploadcmd command /c SZXFER DSZ%K.log RZ %v
Downloadstring %s
Uploadstring
Downloadkeyword z
Uploadkeyword Z
Filenameword 10
Descriptword 0
End protocol
SZXFER.BAT
Set dszlog=%1
C:\szmodem\szmodem /cfgpath /nolog /dl c:\szmodem\ %2 %3
Set dszlog=
---
Good luck.
Steve
--------------= Brought to you compliments of Plastic Tower =---------------
From: Bruno Soucy Area: Protocols
To: Whoever asked for it? 13 Mar 92 13:40:04
Subject: protocol.ctl UpdReq
Terribly sorry for the unadressed reply but the original message has been
deleted... I tried doing an ASCII upload of my Protocol.ctl but everything
screwed up! I'll try it again though:
Protocol MPt
Type Batch
LogFile Mpt.Log
ControlFile Mpt.Ctl
DownloadCmd mpt A+ B- D+ F+ N+ P%P S0 M- W- X+ HF Lmpt.log s
@mpt.ctl
UploadCmd mpt A+ B- D+ F+ N+ P%P S0 M- W- X+ HF Lmpt.log r %v
DownloadString %s
UploadString
DownloadKeyword S
UploadKeyword R
FilenameWord 10
DescriptWord 0
End Protocol
Protocol DSZ/Moby
Type Batch
LogFile DSZ%K.Log
ControlFile DSZ%K.Ctl
DownloadCmd command.com /c rdsz DSZ%K.Log %P %W ha both sz -m -Z
@%x:DSZ%K.Ctl
UploadCmd command.com /c rdsz DSZ%K.Log %P %W ha both rz %v
DownloadString %s
UploadString
DownloadKeyword z
UploadKeyword Z
FilenameWord 10
DescriptWord 0
End Protocol
Protocol BiModem
Type Batch
; Type Errorlevel
Type Bi
; Type Opus
LogFile Bimodem.Log
ControlFile Bimodem.Ctl
DownloadCmd bimodem /B %W /L %P /T %t /R %V /U @Bimodem.Ctl
UploadCmd bimodem /B %W /L %P /T %t /R %V
DownloadString %s
UploadString
DownloadKeyword S
UploadKeyword R
FilenameWord 5
DescriptWord 0
End Protocol
Hope this is clear?!?
Bruno
--------------= Brought to you compliments of Plastic Tower =---------------
From: Bruno Soucy Area: Protocols
To: Whoever asks for it 13 Mar 92 13:44:46
Subject: Protocol.ctl UpdReq
Here's the rest of it...
Protocol HS/LINK
Type Batch
; Type Errorlevel
Type Bi
; Type Opus
LogFile DSZ.Log
ControlFile Hslink.Ctl
DownloadCmd Hs-crack -P1 -HX -K -R -NT -uc:\max\file\pir-upl
@Hslink.Ctl
UploadCmd Hs-crack -K -O -R -NT -uc:\max\file\pir-upl
DownloadString %s
UploadString
DownloadKeyword Sent
UploadKeyword Received
FilenameWord 10
DescriptWord 0
End Protocol% ------------
Protocol >HyPeR<
Type Batch
LogFile Hyper.Log
ControlFile Hyper.Ctl
DownloadCmd Hyperp logfile:hyper.log display:off send @hyper.ctl
UploadCmd Hyperp logfile:hyper.log display:off receive %V
DownloadString %s
UploadString
DownloadKeyword Sent
UploadKeyword Received
FilenameWord 1
DescriptWord 0
End Protocol
Protocol !Super Zmodem
Type Batch
LogFile SZM.Log
ControlFile SZM.Ctl
DownloadCmd Szmodem sz port 1 speed 2400 irq 4 @SZM.Ctl
UploadCmd Szmodem rz port 1 speed 2400 irq 4 \max\file\pir-upl\
DownloadString %s
UploadString
DownloadKeyword Sent
UploadKeyword Received
FilenameWord 1
DescriptWord 0
End Protocol
There it is... If anyone has any suggestions on how I could improve this,
lemme know...
Bruno
--------------= Brought to you compliments of Plastic Tower =---------------
From: Huw Upshall Area: Protocols
To: Bruno Soucy 12 Mar 92 00:48:16
Subject: HS-Link UpdReq
A friend of mine gave me this for the HS-Link protocol, give this one a shot:
Protocol HSLink
Type Batch
; Type Errorlevel
Type Bi
; Type Opus
LogFile d:\max\HSL%K.Log
ControlFile d:\max\HSL%K.Ctl
DownloadCmd command.com /c rhsl d:\max\HSL%K.Log -P%P -B%W -E%b -
U%V @d:\max\HSL%K.Ctl
UploadCmd command.com /c rhsl d:\max\HSL%K.Log -P%P -B%W -E%b -
U%V
DownloadString %s
UploadString
DownloadKeyword h
UploadKeyword H
FilenameWord 10
DescriptWord 0
End Protocol
The rhsl.bat in max directory:
@echo off
d:
cdd d:\max
set dszlog=%1
Hslink %2 %3 %4 %5 %6 %7 %8 %9
set dszlog=
That's just about it
--------------= Brought to you compliments of Plastic Tower =---------------
From: Philip Perlman Area: Protocols
To: All 13 Mar 92 22:10:02
Subject: External Zmodem UpdReq
Using DSZ.EXE registerd, located in my max directory and following the
parameters included in protocol.ctl for moly turbo, I find that DSZ
doesn't work. I created the RDSZ.BAT per the instructions. Are the
suggested parameters incorrect or am I doing something wrong?
Phil
... Veni, vidi, fugi! -- I came, I saw, I got the hell outta there...
--------------= Brought to you compliments of Plastic Tower =---------------
From: Mike Tayeb Area: Protocols
To: Bruno Soucy 13 Mar 92 23:11:42
Subject: HS/Link UpdReq
Bruno,
I heard you were having trouble with HS/Link and Max. Here is the proper
working configuration for it, to be placed in protocol.ctl.
Protocol HS/Link (Bi-directional)
Type Batch
; Type Errorlevel
Type Bi
; Type Opus
LogFile HSLink%K.Log
ControlFile HSLink%K.Ctl
DownloadCmd Command.com /c Rhslink.Bat HSlink%K.Log -@ -P%P -U%V
-E%b -NV @%x:HSLink%K.Ctl
UploadCmd Command.com /c Rhslink.Bat HSLink%K.Log -@ -P%P -U%V
-E%b -NV
DownloadString %s
UploadString
DownloadKeyword h
UploadKeyword H
FilenameWord 10
DescriptWord 0
End Protocol
You must also create the following batch file called RHSLINK.BAT in your Max
directory:
ECHO OFF
SET DSZLOG=%1
HSLINK.EXE %2 %3 %4 %5 %6 %7 %8 %9
SET DSZLOG=
Hope this helps,
Mike
--------------= Brought to you compliments of Plastic Tower =---------------
From: Bruno Soucy Area: Protocols
To: Huw Upshall 14 Mar 92 18:39:34
Subject: HS-Link UpdReq
HU> A friend of mine gave me this for the HS-Link protocol,
HU> give this one a shot:
HU> Protocol HSLink
Thanks! I got it to work...
Bruno (your #1 fan <g>)
--------------= Brought to you compliments of Plastic Tower =---------------
From: Philip Perlman Area: Protocols
To: Ralph Schwarz 15 Mar 92 01:10:40
Subject: HS-Link & Other Protocols UpdReq
If you get Ymodem-G going would you be so kind as to publish your
configuration? I'm having difficulty using DSZ as an external protocol. I am
using 4DOS and modified the Protocol.CTL for DSZ as specified. DSZ works but
when it ends the download, it just stays there in DOS and doesn't return to
the BBS. I'm using 201b and FD 2.02. If you have any hints, I'd appreciate
them. Thanks.
Phil
--------------= Brought to you compliments of Plastic Tower =---------------
From: Kevin Eastman Area: Protocols
To: Philip Perlman 14 Mar 92 14:48:18
Subject: External Zmodem UpdReq
In a msg on <Mar 13 22:10>, Philip Perlman of 1:278/709 writes:
PP> Using DSZ.EXE registerd, located in my max directory and
PP> doesn't work. I created the RDSZ.BAT per the instructions. Are
It works for me. Here is my setup.
Protocol DSZ/Moby
Type Batch
% ; Type Errorlevel
% ; Type Bi
% ; Type Opus
% LogFile DSZ%K.Log
ControlFile DSZ%K.Ctl
DownloadCmd command.com /c rdsz DSZ%K.Log %P %W ha both sz -m -Z
@%x:DSZ%K.Ctl
UploadCmd command.com /c rdsz DSZ%K.Log %P %W ha both rz %v
DownloadString %s
UploadString %s
DownloadKeyword z
UploadKeyword Z
FilenameWord 10
DescriptWord 0
End Protocol
This is waht my RDSZ.Bat looks like.
echo off
set dszlog=%1
dsz port %2 speed %3 %4 %5 %6 %7 %8 %9
set dszlog=C:\Logs\
Kevin.
--------------= Brought to you compliments of Plastic Tower =---------------
From: Kevin Eastman Area: Protocols
To: Huw Upshall 15 Mar 92 04:09:52
Subject: HS-Link UpdReq
In a msg on <Mar 12 00:48>, Huw Upshall of 1:3401/12 writes:
HU> A friend of mine gave me this for the HS-Link protocol, give this
HU> one a shot:
HU> Protocol HSLink
I tried this and it works great. Thank your friend for me.
Kevin.
--------------= Brought to you compliments of Plastic Tower =---------------
From: Colin Wheat Area: Protocols
To: Steve Hughes 14 Mar 92 23:49:00
Subject: Networking/multi-node UpdReq
SH> One thing, you must
SH> either have all nodes fossil locked or all unlocked as
SH> protocol.max is generated for all nodes and is not node
SH> specific. I fell into that trap :-)
Not for v2.01wb :-)
* The path and name for the PROTOCOL.MAX file (binary dump of information
in PROTOCOL.CTL) can now be specified in the SESSION section of MAX.CTL.
The following keyword:
ProtocolCtl D:\Max\Protocol.Max
instructs Max to use d:\max\protocol.max as the protocol information
file for the current task. If this keyword is omitted, Max will
default to using PROTOCOL.MAX in the current directory.
Regards.
--------------= Brought to you compliments of Plastic Tower =---------------
From: Richard Butler Area: Protocols
To: Mike Tayeb 15 Mar 92 13:55:14
Subject: HS/Link UpdReq
Hi Mike!
You wouldn't happen to have the protocol.ctl configuration for SZmodem?
Thanks
--------------= Brought to you compliments of Plastic Tower =---------------
From: Huw Upshall Area: Protocols
To: Ralph Schwarz 14 Mar 92 23:11:08
Subject: HS-Link UpdReq
I have DSZ and Y-Modem-G working, here are my Protocol.CTL entrys...
Protocol GYmodem-G/DSZ
Type Batch
% Type Errorlevel
% Type Bi
% Type Opus
LogFile DSZ%K.Log
ControlFile DSZ%K.Ctl
DownloadCmd command.com /c rdsz DSZ%K.Log %P 19200 ha both sb -g
-Z @%x:DSZ%K.Ctl
UploadCmd command.com /c rdsz DSZ%K.Log %P 19200 ha both rb -g
%v
DownloadString %s
UploadString
DownloadKeyword S
UploadKeyword R
FilenameWord 10
DescriptWord 0
End Protocol
And for DSZ, i use Scott's entry that was distributed, On the DSZ, you need
to have a version of DSZ.EXE (or COM) that supports Moby Turbo, i had a
old registered version of DSZ and had to get an updated copy 'cause it wouldn't
work. For Moby and Y-G, i use DSZ.COM, and on both Accounts, you need to run
the RDSZ.BAT file, that is this:
echo off
set dszlog=%1
dsz port %2 speed %3 %4 %5 %6 %7 %8 %9
set dszlog=
Good luck.
--------------= Brought to you compliments of Plastic Tower =---------------
From: David Page Area: Protocols
To: Philip Perlman 16 Mar 92 08:25:02
Subject: Re: HS-Link & Other Protocols UpdReq
PP> If you get Ymodem-G going would you be so kind as to
PP> publish your configuration? I'm having difficulty
PP> using DSZ as an external protocol. I am using 4DOS and
PP> modified the Protocol.CTL for DSZ as specified. DSZ
PP> works but when it ends the download, it just stays
PP> there in DOS and doesn't return to the BBS. I'm using
PP> 201b and FD 2.02. If you have any hints, I'd
PP> appreciate them. Thanks.
PP> Phil
PP> --- Maximus 2.01wb
PP> * Origin: * BlueDog BBS * (212) 594-4425 * NY,NY *
PP> HST/DS (1:278/709)
PP> Try this:
Protocol Ymodem/DSZ
Type Batch
% ; Type Errorlevel
% ; Type Bi
% ; Type Opus
%
LogFile DSZY%K.Log
ControlFile DSZY%K.Ctl
DownloadCmd g:\4dos\4dos.com /c rdsz DSZY%K.Log %P 38400 ha both sb
@%x:DSZY%K.Ctl
UploadCmd g:\4dos\4dos.com /c rdsz DSZY%K.Log %P 38400 ha both rb %v
DownloadString %s
UploadString
DownloadKeyword y
UploadKeyword Z
FilenameWord 10
DescriptWord 0
End Protocol
Note that the download and upload lines wrapped. This is specific to 4dos.
--- Sirius 1.0ya
--------------= Brought to you compliments of Plastic Tower =---------------
From: Peter Cooper Area: Protocols
To: Richard Butler 17 Mar 92 11:13:50
Subject: Szmodem UpdReq
In a msg on <Mar 15 13:55>, Richard Butler of 1:396/61 writes:
RB> You wouldn't happen to have the protocol.ctl configuration for SZmodem?
I'm going to bud in here, I set Szmodem up with max. It took a wee bit of
trial and error...
If you are not really interested in making a wee program to do this,
just log onto my BBS, use the GUEST account, NO password, and use the
Door: d/l SZHASH
There is a detailed description on what is done/and sample configuration.
if you want, I will reply with a description of what must be done in the
program. (save you long distance time).
--------------= Brought to you compliments of Plastic Tower =---------------
From: Charlie Johnson Area: Protocols
To: Steve Hughes 16 Mar 92 14:43:02
Subject: Re: SZmodem UpdReq
SH> RB> Anybody have the PROTOCOL.CTL settings for SZmodem?
SH>
SH> CJ> I been asking for several months now with only 1 reply
SH> CJ> on the topic,(and that was an "Sorry but I can't help
SH> CJ> you on that one" reply).
SH>
SH> Someone else posted this a month or so ago.
SH> It's not mine !!!
SH> I emphasize that because it wouldn't work for me, you
SH> may have better luck of course :-)
Thanks! At least that's something to work with. Bruno Soucy says he has SZM
working so let's see how his may differ when or if he posts it.
CJ
--------------= Brought to you compliments of Plastic Tower =---------------
From: Gerhard Lustig Area: Protocols
To: Philip Perlman 16 Mar 92 05:50:38
Subject: External Zmodem UpdReq
Servus Philip!
13.Mar.1992, Philip Perlman writes to All:
PP> suggested parameters incorrect or am I doing something wrong?
i using dsz.com in this way:
% ------------
% PROTOCOL.CTL
% ------------
Protocol Zmodem
Type Batch
LogFile DSZ%K.Log
ControlFile DSZ%K.Ctl
DownloadCmd DSZ.COM ha both port %P speed %W pB2048 e D %b sz -rr
@%x:DSZ%K.Ctl
UploadCmd DSZ.COM ha both port %P speed %W pB2048 e D %b rz -rr
%V
DownloadString %s
UploadString
DownloadKeyword z
UploadKeyword Z
FilenameWord 10
DescriptWord 0
End Protocol
and my exebbs.bat for max:
f:
cd %MAX%
if %1==LOCAL goto LOCAL
if %1==REMOUTE goto REMOUTE
SET TASK=01
SET DSZLOG=%MAX%\DSZ%TASK%.LOG
SET LOCKBAUD=38400
max -b%1 -s%LOCKBAUD% -p%2 -t%3 -l%log%\max%task%.log -n%task% -xz
goto start
:local
SET TASK=02
SET DSZLOG=%MAX%\DSZ%TASK%.LOG
SET LOCKBAUD=38400
max -k -s%LOCKBAUD% "-jgerhard lustig;y;passwort;|;n;|;n;n" -n%task%
-l%log%\max%task%.log -xz
goto start
:remoute
SET TASK=02
SET DSZLOG=%MAX%\DSZ%TASK%.LOG
SET LOCKBAUD=115200
max -w -p%2 -n%task% -s%LOCKBAUD% -lf:\fd\log\max%task%.log -xz
goto start
:restart
f:
echo
echo Restart Maximus V2.01
echo
cd %max%
max -r -s%LOCKBAUD% -n%task% -l%log%\max%task%.log -xz
:start
......
goto restart
mfg. Gerhard
--------------= Brought to you compliments of Plastic Tower =---------------
From: Peter Cooper Area: Protocols
To: Richard Butler 19 Mar 92 21:03:08
Subject: Szmodem UpdReq
In a msg on <Mar 17 21:58>, Richard Butler of 1:396/61 writes:
PC> if you want, I will reply with a description of what must be done
PC> in the program. (save you long distance time).
RB> That would be great if you'd post the info here. I'm sure there
RB> are others that would be interested.
Protocol !SuperZ!
Type Batch
LogFile DSZ.LOG
ControlFile DSZ.CTL
DownloadCmd SZsend.com %p %b DSZ.CTL SEND DSZ.LOG
UploadCmd SZrecv.com %p %b \FILES\TOSS\ RECV DSZ.LOG
DownloadString %s
UploadString
DownloadKeyword SEND
UploadKeyword RECV
FilenameWord 11
End Protocol
-=- szsend.bat
@echo off
if exist %5 del %5
SZMODEM SPEED %2 /NOPAGE /OCOMP /SZTURBO /DL SZ @%3
if exist %3 del %3
CLS
SZHASH %4 %5
translated into:
@echo off
if exist DSZ.log del DSZ.log
szmodem SPEED <current baud rate> /NOPAGE /OCOMP /SZTURBO /DL SZ @DSZ.LOG
if exist dsz.ctl del dsz.ctl
CLS
SZHASH <download keyword> DSZ.LOG
-=- szrecv
this is very simular to szsend... except it replaces the <download keyword>
with the <upload keyword> and *important* specifies the uploads path.
read szmodem.doc for more info.
DSZ.LOG: szmodem's szmodem.log option must be on as well as the DSZ log
style... Dsz.log is the closest format.... (the uploads and
downloads entries are undesernable, and this is why all the
trouble... Maximus needs the DSZ.LOG to get all the info, and
without the program Max will think (with the regular Zmodem
settings) that the user always downloads...
DSZ.CTL a @ before DSZ.CTL is needed to tell Szmodem that this is the list
of files to to be sent.
Download string: leave this alone, or the file list in DSZ.LOG will not show
up.
FileName Word: This is set to 11 becuase 11 words after either of the
--------------= Brought to you compliments of Plastic Tower =---------------